also, check sh queueing int gi1/9
James Slepicka wrote:
sh int gi1/9 trans detail?
Tim Durack wrote:
On Fri, Feb 5, 2010 at 11:07 AM, Jeff Kell <[email protected]> wrote:
On 2/5/2010 10:49 AM, Tim Durack wrote:
On Fri, Feb 5, 2010 at 10:42 AM, Matlock, Kenneth L
<[email protected]> wrote:
Can you paste in the full 'show int', my guess is you're getting
input
buffer failures (need to see the 'Input Queue' line in particular).
Input errors on LH fiber... try "show int g1/9 count err" and look for
symbol errors.
Only Rcv-Err:
sh int g1/9 counters errors
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize
OutDiscards
Gi1/9 0 0 0 16840
0 0
Port Single-Col Multi-Col Late-Col Excess-Col Carri-Sen
Runts Giants
Gi1/9 0 0 0 0 0
0 0
Port SQETest-Err Deferred-Tx IntMacTx-Err IntMacRx-Err
Symbol-Err
Gi1/9 0 0 0
0 0
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
