Thanks Matt and Brian.
This indeed seem to be an I/O controller issue (although the CCO docs
say the sensors are on the PSU and the engine was supposed to process
them). I've tried swapping I/O controllers keeping the rest of the
hardware configuration intact; router up and running for more than 12hrs.
Might need to track down what's giving an increase in resistance which
results to overshooting the -12V thresholds.
Regards,
Roy
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
