Does anyone know which IC is being used by the 720x VXR router for
monitoring the voltage readings (specially the one for -12V)?
I've looked around and seems the DS1620 on I/O card is only for
temperature. I could be wrong though.
Would appreciate if anyone can point me into the right docs. Trying to
troubleshoot an internal -12V issue which shuts down my 7206VXR upon
reaching the threshold within 5 minutes of power-up.
This happens on C7206VXR chassis, NPE-400, I/O-2FE/E controller. I have
only been looking into the I/O controller. All tray fans working; input
voltage good and clean on either/both PSU's. Inlet/outlet temps within
range.
Thanks,
roy
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
