You can set your neighbor statements to allow learning from the same AS so
the routes won't be dropped.
Another good way to do this is to set up a GRE tunnel between the sites and
connect your devices using the attached /30 addresses.
----- Original Message -----
From: "Randy McAnally" <[email protected]>
To: <[email protected]>
Sent: Wednesday, September 02, 2009 1:51 PM
Subject: [c-nsp] BGP multihop between two sites
We have two sites advertising unique subnets via the same AS. Since the
subnets originate from the same AS they apparently get dropped from the
tables
at each site.
Each site has at least 3 upstreams taking full tables from each with a
6509.
Site a has a single border router with dual supervisors.
Site b actually has dual border routers. Each router handles different
upstreams and trades routes via iBGP.
So I think I need to set up a multihop session between the sites.
Right now, traffic between sites is taking the floating default route and
causes issues between sites when one of our BGP peers is down for whatever
reason.
What are the things to look out for when setting up this multihop? Are
there
gotcha's to deal with given one site has dual active routers?
Can anyone provide me or point me to an example multihop config to work
from?
--
Randy
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
