On Sun, Aug 30, 2009 at 05:25:25PM +0100, Mateusz Blaszczyk wrote: > On Sat, Aug 29, 2009 at 07:50:22PM +0100, Mateusz Blaszczyk wrote: > > > With SXF this has never been a > > > problem, only with SRB/SXH and newer. > > > > Yes, I forgot about the SXF can be run on both platforms. Then one thing > > less to worry about. > > > not so happy anymore. > done some reading and it seems 7606S was supported first by SR train: > http://www.cisco.com/en/US/docs/ios/12_2sr/release/notes/122SRrn.html#wp4344593 > I wonder if that will boot under SX (12.2(18)SXE6a).
Hi Mat, When we switched over the 6509s to a 7609-S chassis, it booted and ran fine under SXF15a. After verifying the functionality, we moved to SRC2. Hopefully this is of some help, Rob -- Rob Shakir <[email protected]> Network Development Engineer GX Networks/Vialtus Solutions ddi: +44208 587 6077 mob: +44797 155 4098 pgp: 0xc07e6deb nic-hdl: RJS-RIPE This email is subject to: http//www.vialtus.com/disclaimer.html _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
