On Sat, 2009-08-29 at 17:39 +0100, Mateusz Blaszczyk wrote: > We are going to replace a chassis of our core router (SUP720). > At the moment it is a standard 6509, but the new one is going to be a > smaller 7606S, using the same SUP720 (also the plan is to update the > TCAM with XL memory upgrade kit). The box is running SXF. > > Did anyone undergo such switchover? Are there any gotchas to avoid, > some tips(howtos) to follow? We will run SRB or SRC, not sure yet.
We tried the other way around a couple of times, i.e. moved a Sup720 from a 7600 chassis to a 6500 chassis. The only kind of "problem" we ran into was to sometimes not remember to have a copy of the software that will actually boot in the other chassis. With SXF this has never been a problem, only with SRB/SXH and newer. Otherwise it has been painless. Regards, Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
