On Jun 12, 2009, at 9:51 AM, Bill Blackford wrote:
Your question is one of mine as well. I plan to from EC's across the
6548 and a 6516-GBIC (yes copper and fiber).
So does this essentially mean that every 6 ports has its own gig
ASIC? So, I'd have to stagger like: 1/1, 1/7, 1/13, etc.?
You can see the port ASIC mapping with the following command: (note
the 1-12 or 1-8 grouping)
Router#show interfaces f3/1 capabilities
FastEthernet3/1
Dot1x: yes
Model: WS-X6348-RJ-45
Type: 10/100BaseTX
Speed: 10,100,auto
Duplex: half,full
Trunk encap. type: 802.1Q,ISL
Trunk mode: on,off,desirable,nonegotiate
Channel: yes
Broadcast suppression: percentage(0-100)
Flowcontrol: rx-(off,on),tx-(none)
Membership: static
Fast Start: yes
QOS scheduling: rx-(1q4t), tx-(2q2t)
CoS rewrite: yes
ToS rewrite: yes
Inline power: no
SPAN: source/destination
UDLD yes
Link Debounce: yes
Link Debounce Time: no
Ports on ASIC: 1-12
Port-Security: yes
Router#sh int g1/1 cap
GigabitEthernet1/1
Model: WS-X6416-GBIC
Type: 1000BaseSX
Speed: 1000
Duplex: full
Trunk encap. type: 802.1Q,ISL
Trunk mode: on,off,desirable,nonegotiate
Channel: yes
Broadcast suppression: percentage(0-100)
Flowcontrol: rx-(off,on,desired),tx-(off,on,desired)
Membership: static
Fast Start: yes
QOS scheduling: rx-(1p1q4t), tx-(1p2q2t)
QOS queueing mode: rx-(cos), tx-(cos)
CoS rewrite: yes
ToS rewrite: yes
Inline power: no
SPAN: source/destination
UDLD yes
Link Debounce: yes
Link Debounce Time: yes
Ports on ASIC: 1-8
Remote switch uplink: yes
Dot1x: yes
Port-Security: yes
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
