Hi,
I have something similar on a 7200 running 12.3(24a).
Line User Host(s) Idle Location
2 vty 0 idle 14w6d A.B.C.D
I just haven't got around to reloading the router as this seems the only way to
clear the vty.
Cheers,
Kris
On 3/06/09 6:47 PM, "Gert Doering" <[email protected]> wrote:
Hi,
On Wed, Jun 03, 2009 at 10:29:59AM +0200, Peter Rathlev wrote:
> > - "vty 0" looks weird. I can't find a way to recover that vty, that is
> > "clear line 1" or "clear line vty 0" don't change anything. Nor is there
> > a TCB assigned to it ("show tcp vty 1" shows my telnet connection, but
> > "show tcb vty 0" doesn't display anything).
>
> I've seen this on a 3560 when I tried running an exec command needing
> user input via TFTP uploaded configuration. (Specifically I tried to do
> a "do delete flash:/something" as a test.)
Mmmh. I'm not sure what my colleagues tried - I just found the box in
this state...
> The session never recovered and only a hard reset (power off) could fix
> it. The "reload" command didn't work. It was accepted, but nothing
> happened. Needless to say, I just went on with my life and ignored
> this. :-)
Now *that* is scary. Sounds something really got stuck on your box.
Well. Time to reload, and upgrade to SXI...
> No strange commands were present in the "new_config.txt" copied over?
It wasn't *my* new_config.txt, otherwise all the other SXH3a boxes would
be in the same funny state now as well (and they aren't). Just two of
them...
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
--
Kind Regards,
Kris Amy
Enterprise IP
Phone: 07 3123 5510
National: 1300 347 287
Fax: 1300 347 329
Direct: 07 3123 5511
Email: [email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
