Hi, so far, we have been quite happy with SXH3a, but today two of our boxes have started playing games with me... notably, the command we use to auto-upload ACLs etc
rcp new_config.txt router:running-config
started to fail with "rcp: running-config: No such file or directory".
On other boxes, it works "as usual". All the "ip rcmd" config is present
and sane.
The only thing that looks different is this:
Cisco#who
Line User Host(s) Idle Location
1 vty 0 Virtual Exec 00:00:00
* 2 vty 1 gert idle 00:00:00 mgmthost
Interface User Mode Idle Peer Address
Cisco#
- "vty 0" looks weird. I can't find a way to recover that vty, that is
"clear line 1" or "clear line vty 0" don't change anything. Nor is there
a TCB assigned to it ("show tcp vty 1" shows my telnet connection, but
"show tcb vty 0" doesn't display anything).
So... is this a known bug in SXH3a? Is there a way to reclaim that VTY
without rebooting?
(I've also tried configuring "transport input none" under "line vty 0",
and to completely disable "ip rcmd ..." to get rid of the session, but no
change either).
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgp2HzHfrRz2q.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
