Open device manager and look under comm ports. That should tell you
which chip is in the cable you're using, but more importantly what port
it's on.
If you've done this already - you don't say - then check and make sure
you have the correct UV-82 selected.
//al
------ Original Message ------
From "D Bunk" <w3jf...@gmail.com>
To chirp_users@intrepid.danplanet.com
Date Mon 12 19 22 17:56:21
Subject [chirp_users] Error comport
I have a brand new baofeng UV-82 but can not get the program to
recognize it. I keep getting an error message “can not open port”. I
have downloaded the lasted version of the program. Any ideas? Using
windows 10 on pc.
/r
Dean
/r
Dean
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to arch...@mail-archive.com at arch...@mail-archive.com
To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-ow...@intrepid.danplanet.com
Searchable archive:
https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
