Hi Dean,
Make sure that the cable is really tight in the radio.
And, open device manager and see what port is in use, and make sure the same
port is selected in Chirp.
That is where I would start.
HTH.
Glenn
----- Original Message -----
From: D Bunk
To: chirp_users@intrepid.danplanet.com
Sent: Monday, December 19, 2022 5:56 PM
Subject: [chirp_users] Error comport
I have a brand new baofeng UV-82 but can not get the program to recognize it. I
keep getting an error message “can not open port”. I have downloaded the lasted
version of the program. Any ideas? Using windows 10 on pc.
/r
Dean
/r
Dean
--------------------------------------------------------------------------------
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at glenn@ervin.email
To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-ow...@intrepid.danplanet.com
Searchable archive:
https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to arch...@mail-archive.com at arch...@mail-archive.com
To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-ow...@intrepid.danplanet.com
Searchable archive:
https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
