Just tried your suggestion. same problem thanks for trying
> On August 25, 2020 at 11:31 AM Glenn K0LNY <glenner...@cableone.net> wrote: > > Hi Chuck, > Could it be that your battery is the problem? > Can you keep it in the charging cradle while doing the Chirp work? > HTH. > Glenn > ----- Original Message ----- > From: Charles Gierke mailto:cgie...@cox.net > To: Discussion of CHIRP mailto:chirp_users@intrepid.danplanet.com ; Peter > J. McClosky mailto:pmcclo...@earthlink.net > Sent: Tuesday, August 25, 2020 1:27 PM > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating > > HI, I followed your advice and took it slow. I waited a minimum of 10 > seconds, I put a strangle hold on the plug and radio to insure the plug was > fully into the socket. I double checked the USB plug was in the USB socket > and it was connected to the Win 10 computer as COM 3. > > the radio is still not connecting to CHIRP. About 3 seconds after > starting the download, the radio seems to shut itself off and restart. > > thanks for your time and help. > Chuck > > > > > On August 24, 2020 at 6:09 PM "Peter J. McClosky" > <pmcclo...@earthlink.net> wrote: > > > > Hello, > > > > I have programed well over a hundred UV-5x radios and have had both > > easy and hard times programing them. > > > > One thing that I learned is to slow down, waiting about 10 seconds > > between actions taken on the computer. This solve most of the error > > problems. > > > > If that does not work, most of the rest to the time ,it is solved > > by pushing the programing cable into the radio and keep pressure on the > > cable until the pride is programed. I have to push it VERY hard. > > > > On a windows machines you have to select the right com port (I am > > mostly a mac person so I find the right port by trial and error). > > > > As an aside, using more that 60 cables to program the radios, I > > have only found one cable that was defective, so that is most likely, not > > the problem. > > ----- > > Peter J. McClosky, N7IY > > Eugene, Oregon > > pmcclo...@earthlink.net mailto:pmcclo...@earthlink.net > > n...@arrl.net > > http://home.earthlink.net/~pmcclosky/ > > > > > > > > > On Aug 24, 2020, at 5:43 PM, Charles Gierke < > > cgie...@cox.net mailto:cgie...@cox.net > wrote: > > > > > > thanks for the suggestion. Unfortunately, no luck. > > > > > > Chuck > > > > > > > > > > > > > On August 23, 2020 at 4:26 PM Silverfox < > > > alan.r.h...@gmail.com mailto:alan.r.h...@gmail.com > wrote: > > > > > > > > I forgot that you are on Windows. The windows OS is > > > > very poor supporting USB. You might try going into the device manager > > > > and tell it to show hidden devices. Once that is done, look at the USB > > > > entries and delete all of them that are diminished icons. That is, > > > > they are lighter than the other icons. > > > > Good luck. > > > > Alan > > > > > > > > From: chirp_users-boun...@intrepid.danplanet.com > > > > mailto:chirp_users-boun...@intrepid.danplanet.com > > > > [mailto:chirp_users-boun...@intrepid.danplanet.com] On Behalf Of > > > > Charles Gierke > > > > Sent: Sunday, August 23, 2020 3:05 PM > > > > To: Discussion of CHIRP; John LaMartina > > > > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not > > > > communicating > > > > > > > > hi, still no luck. > > > > I went to the web site and put a death-grip on the plug > > > > and held it in as far as it would go. I trimmed a hair of the edges of > > > > the plug to let it seat on the bottom. > > > > > > > > thanks for the suggestions > > > > > > > > > > > > > > > > <!--[endif]--> > > > > On August 22, 2020 at 5:55 PM John LaMartina > > > > <joh...@usa.net mailto:joh...@usa.net > wrote: > > > > > > > > This may assist. > > > > Www.Miklor.com/COM/UV_ErrorMess.php > > > > http://www.miklor.com/COM/UV_ErrorMess.php > > > > > > > > John > > > > Www.Miklor.com/UV5R http://www.miklor.com/UV5R > > > > > > > > > > > > > > > > > > > > <!--[endif]--> > > > > On Aug 22, 2020, at 6:45 PM, Charles Gierke > > > > <cgie...@cox.net mailto:cgie...@cox.net > wrote: > > > > > > > > > > > > > > > > > > > > > > > On Wednesday my 2 BaoFeng UV 5R radios could > > > > > download and upload to CHIRP. > > > > > > > > > > On Friday all I got was the following message: > > > > > Radio Did Not Respond. > > > > > > > > > > I tried reloading the latest version of CHIRP, no > > > > > change. I tried an earlier version of CHIRP, no change. I reloaded > > > > > the latest version back, no change. Visually the radio's red light > > > > > blinks then the LED display blinks then the error message shows up on > > > > > CHIRP. > > > > > > > > > > > > > > > Any suggestions? > > > > > > > > > > Thanks Chuck KJ7INT > > > > > > > > > > _______________________________________________ > > > > > chirp_users mailing list > > > > > chirp_users@intrepid.danplanet.com > > > > > mailto:chirp_users@intrepid.danplanet.com > > > > > > > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > > > This message was sent to John LaMartina at > > > > > joh...@usa.net mailto:joh...@usa.net > > > > > To unsubscribe, send an email to > > > > > chirp_users-unsubscr...@intrepid.danplanet.com > > > > > mailto:chirp_users-unsubscr...@intrepid.danplanet.com > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > chirp_users mailing list > > > > chirp_users@intrepid.danplanet.com > > > > mailto:chirp_users@intrepid.danplanet.com > > > > > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > > This message was sent to Chuck at cgie...@cox.net > > > > mailto:cgie...@cox.net > > > > To unsubscribe, send an email to > > > > chirp_users-unsubscr...@intrepid.danplanet.com > > > > mailto:chirp_users-unsubscr...@intrepid.danplanet.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > chirp_users mailing list > > > > chirp_users@intrepid.danplanet.com > > > > mailto:chirp_users@intrepid.danplanet.com > > > > > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > > This message was sent to Chuck at cgie...@cox.net > > > > mailto:cgie...@cox.net > > > > To unsubscribe, send an email to > > > > chirp_users-unsubscr...@intrepid.danplanet.com > > > > mailto:chirp_users-unsubscr...@intrepid.danplanet.com > > > > > > > > > > > > > > > _______________________________________________ > > > chirp_users mailing list > > > chirp_users@intrepid.danplanet.com > > > mailto:chirp_users@intrepid.danplanet.com > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > This message was sent to Peter at pmcclo...@earthlink.net > > > mailto:pmcclo...@earthlink.net > > > To unsubscribe, send an email to > > > chirp_users-unsubscr...@intrepid.danplanet.com > > > mailto:chirp_users-unsubscr...@intrepid.danplanet.com > > > > > > > > > > > > > > > > > _______________________________________________ > > chirp_users mailing list > > chirp_users@intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Chuck at cgie...@cox.net > > To unsubscribe, send an email to > > chirp_users-unsubscr...@intrepid.danplanet.com > > > > > > > > --------------------------------------------- > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Glenn at glenner...@cableone.net > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Chuck at cgie...@cox.net > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com >
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
