Hi Chuck,
Could it be that your battery is the problem?
Can you keep it in the charging cradle while doing the Chirp work?
HTH.
Glenn
----- Original Message -----
From: Charles Gierke
To: Discussion of CHIRP ; Peter J. McClosky
Sent: Tuesday, August 25, 2020 1:27 PM
Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
HI, I followed your advice and took it slow. I waited a minimum of 10 seconds,
I put a strangle hold on the plug and radio to insure the plug was fully into
the socket. I double checked the USB plug was in the USB socket and it was
connected to the Win 10 computer as COM 3.
the radio is still not connecting to CHIRP. About 3 seconds after starting the
download, the radio seems to shut itself off and restart.
thanks for your time and help.
Chuck
On August 24, 2020 at 6:09 PM "Peter J. McClosky" <pmcclo...@earthlink.net>
wrote:
Hello,
I have programed well over a hundred UV-5x radios and have had both easy and
hard times programing them.
One thing that I learned is to slow down, waiting about 10 seconds between
actions taken on the computer. This solve most of the error problems.
If that does not work, most of the rest to the time ,it is solved by pushing
the programing cable into the radio and keep pressure on the cable until the
pride is programed. I have to push it VERY hard.
On a windows machines you have to select the right com port (I am mostly a
mac person so I find the right port by trial and error).
As an aside, using more that 60 cables to program the radios, I have only
found one cable that was defective, so that is most likely, not the problem.
-----
Peter J. McClosky, N7IY
Eugene, Oregon
pmcclo...@earthlink.net
n...@arrl.net
http://home.earthlink.net/~pmcclosky/
On Aug 24, 2020, at 5:43 PM, Charles Gierke < cgie...@cox.net> wrote:
thanks for the suggestion. Unfortunately, no luck.
Chuck
On August 23, 2020 at 4:26 PM Silverfox < alan.r.h...@gmail.com> wrote:
I forgot that you are on Windows. The windows OS is very poor supporting
USB. You might try going into the device manager and tell it to show hidden
devices. Once that is done, look at the USB entries and delete all of them
that are diminished icons. That is, they are lighter than the other icons.
Good luck.
Alan
From: chirp_users-boun...@intrepid.danplanet.com
[mailto:chirp_users-boun...@intrepid.danplanet.com] On Behalf Of Charles Gierke
Sent: Sunday, August 23, 2020 3:05 PM
To: Discussion of CHIRP; John LaMartina
Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
hi, still no luck.
I went to the web site and put a death-grip on the plug and held it in as
far as it would go. I trimmed a hair of the edges of the plug to let it seat on
the bottom.
thanks for the suggestions
<!--[endif]-->
On August 22, 2020 at 5:55 PM John LaMartina <joh...@usa.net> wrote:
This may assist.
Www.Miklor.com/COM/UV_ErrorMess.php
John
Www.Miklor.com/UV5R
<!--[endif]-->
On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgie...@cox.net> wrote:
On Wednesday my 2 BaoFeng UV 5R radios could download and upload to
CHIRP.
On Friday all I got was the following message: Radio Did Not Respond.
I tried reloading the latest version of CHIRP, no change. I tried an
earlier version of CHIRP, no change. I reloaded the latest version back, no
change. Visually the radio's red light blinks then the LED display blinks then
the error message shows up on CHIRP.
Any suggestions?
Thanks Chuck KJ7INT
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John LaMartina at joh...@usa.net
To unsubscribe, send an email to
chirp_users-unsubscr...@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chuck at cgie...@cox.net
To unsubscribe, send an email to
chirp_users-unsubscr...@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chuck at cgie...@cox.net
To unsubscribe, send an email to
chirp_users-unsubscr...@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Peter at pmcclo...@earthlink.net
To unsubscribe, send an email to
chirp_users-unsubscr...@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chuck at cgie...@cox.net
To unsubscribe, send an email to
chirp_users-unsubscr...@intrepid.danplanet.com
--------------------------------------------------------------------------------
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glenner...@cableone.net
To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to arch...@mail-archive.com at arch...@mail-archive.com
To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
