I have used chirp with my FT1D and FTM400 and never bricked either of them.
While working on drivers for those 2 radios I have sent settings to the radio that effectively factory reset it but never bricked it. So unless you're changing the source code I think you should be fine with either of those. On 2020-03-17 08:52, Dennis Wage wrote: > I thought I sent this email the other day but must have started > writing it and never sent. > > Is there any documented cases of Chirp bricking a radio so badly it > had to be sent back for a factory restore. > > I see so many Yaesu users bring this up that they're afraid to use > Chirp because it will break a radio bad enough to void warranty etc. > etc... > > Dennis M. Wage (W9BOQ) > > 245 Corum Hill Road > > Castalian Springs, TN 37031 > > (615) 310-4242 Cell > > (615) 562-5128 Home > http://hammondb3organ.net [1] > > http://overdubs.net > > > Links: > ------ > [1] http://hammondb3organ.net/ > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Angus Ainslie at an...@akkea.ca > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
