Hi Dan,
See if this helps.
Press the Menu button then press the down arrow or the up arrow until
you get the item 21 - MDF-A Channel Display, Hit menu again the the up
or down arrow until you see Channel Name then press Menu again then
Exit.
Do the same thing for item 22 - MDF-B Channel Display only this time
select Frequency.
Now if you have both A & B set to the same channel the A display will
show the name and the B display the frequency.
Good luck,
Tom
------ Original Message ------
From: "Dan Jolley" <danjol...@hotmail.com>
To: "Discussion of CHIRP" <chirp_users@intrepid.danplanet.com>
Sent: 5/17/2019 3:24:20 PM
Subject: Re: [chirp_users] UV-82HP display question
No problem Tom. I watched a guy do something like that on the keypad on
a YouTube video, but it wasn't the display I had in mind. Plus he
didn't explain a lot, especially which keys he pressed on the keyboard.
Dan
This Hotmail is a pain!!!! It's nothing like Yahoo!
--------------------------------------------------------------------------------
From:chirp_users-boun...@intrepid.danplanet.com
<chirp_users-boun...@intrepid.danplanet.com> on behalf of Tom Balaban
<mototom...@gmail.com>
Sent: Friday, May 17, 2019 2:13 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] UV-82HP display question
Hi Dan,
I may have mildly misspoke. I know it can be done manually but I think
it would be very difficult, if not impossible to get CHIRP to do it.
Sorry for any confusion.
Tom
------ Original Message ------
From: "Dan Jolley" <danjol...@hotmail.com>
To: "chirp_users@intrepid.danplanet.com"
<chirp_users@intrepid.danplanet.com>
Sent: 5/17/2019 3:01:42 PM
Subject: Re: [chirp_users] UV-82HP display question
Thanks Charles & Tom, I have tried so many combinations in Chirp and
I've also watched some YouTube videos, none of them have shown that
capability. I couldn't get it to do it in Chirp either.
It sure would be nice to have that feature! Anyway, if I knew someone
that knew how to do that it would be ya'll!
Thanks again,
Dan Jolley
--------------------------------------------------------------------------------
From: Dan Jolley
Sent: Friday, May 17, 2019 1:13 PM
To:chirp_users@intrepid.danplanet.com
Subject: UV-82HP display question
I have a UV-82HP, and I would like the top line to say the channel
name, and on the bottom line I would like it to show the correct
frequency of the channel I am on. Example: If I am on NOAA on the top
line I would like it to show 162.525 on the bottom line. Which is the
NOAA frequency in our area.
I also have a UV-82C, UV-5R and a UV-5RTP I would like to do the same
thing to (if possible).
Is this possible? I have done so many google searches and read a bunch
of articles. One man said he had his radio this way, but did not say
how he did it.
I have been playing around with the Settings in Chirp and I have the
Name on the top line, but can't get the correct frequency on the
bottom line.
Thank you in advance,
Dan Jolley
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to arch...@mail-archive.com at arch...@mail-archive.com
To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
