I know that can be done by setting the display mode as you would prefer
in the "A" and the "B" displays. However you must set both displays to
the same channel manually. I'm not aware of an automatic sync
capability.
Tom
------ Original Message ------
From: "Dan Jolley" <danjol...@hotmail.com>
To: "chirp_users@intrepid.danplanet.com"
<chirp_users@intrepid.danplanet.com>
Sent: 5/17/2019 2:13:20 PM
Subject: [chirp_users] UV-82HP display question
I have a UV-82HP, and I would like the top line to say the channel
name, and on the bottom line I would like it to show the correct
frequency of the channel I am on. Example: If I am on NOAA on the top
line I would like it to show 162.525 on the bottom line. Which is the
NOAA frequency in our area.
I also have a UV-82C, UV-5R and a UV-5RTP I would like to do the same
thing to (if possible).
Is this possible? I have done so many google searches and read a bunch
of articles. One man said he had his radio this way, but did not say
how he did it.
I have been playing around with the Settings in Chirp and I have the
Name on the top line, but can't get the correct frequency on the bottom
line.
Thank you in advance,
Dan Jolley
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to arch...@mail-archive.com at arch...@mail-archive.com
To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
