Hm. That's quite weird. On our cluster, when I set "noscrub",
"nodeep-scrub", scrubbing will always stop pretty quickly (a few
minutes). I wonder why this doesnt happen on your cluster. When exactly
did you set the flag? Perhaps it just needs some more time... Or there
might be a disk problem why the scrubbing never finishes. Perhaps it's
really a good idea, just like you proposed, to shutdown the
corresponding OSDs. But that's just my thoughts. Perhaps some Ceph pro
can shed some light on the possible reasons, why a scrubbing might get
stuck and how to resolve this.
Am 22.08.2017 um 18:58 schrieb Ramazan Terzi:
Hi Ranjan,
Thanks for your reply. I did set scrub and nodeep-scrub flags. But active
scrubbing operation can’t working properly. Scrubbing operation always in same
pg (20.1e).
$ ceph pg dump | grep scrub
dumped all in format plain
pg_stat objects mip degr misp unf bytes log disklog state
state_stamp v reported up up_primary acting
acting_primary last_scrub scrub_stamp last_deep_scrub deep_scrub_stamp
20.1e 25189 0 0 0 0 98359116362 3048 3048
active+clean+scrubbing 2017-08-21 04:55:13.354379 6930'23966663
6930:20949058 [29,31,3] 29 [29,31,3] 29 6712'22950171
2017-08-20 04:46:59.208792 6712'22950171 2017-08-20 04:46:59.208792
$ ceph -s
cluster ****
health HEALTH_WARN
33 requests are blocked > 32 sec
noscrub,nodeep-scrub flag(s) set
monmap e9: 3 mons at
{ceph-mon01=**:6789/0,ceph-mon02=**:6789/0,ceph-mon03=**:6789/0}
election epoch 84, quorum 0,1,2 ceph-mon01,ceph-mon02,ceph-mon03
osdmap e6930: 36 osds: 36 up, 36 in
flags noscrub,nodeep-scrub,sortbitwise,require_jewel_osds
pgmap v17667617: 1408 pgs, 5 pools, 24779 GB data, 6494 kobjects
70497 GB used, 127 TB / 196 TB avail
1407 active+clean
1 active+clean+scrubbing
Thanks,
Ramazan
On 22 Aug 2017, at 18:52, Ranjan Ghosh <gh...@pw6.de> wrote:
Hi Ramazan,
I'm no Ceph expert, but what I can say from my experience using Ceph is:
1) During "Scrubbing", Ceph can be extremely slow. This is probably where your "blocked
requests" are coming from. BTW: Perhaps you can even find out which processes are currently blocking
with: ps aux | grep "D". You might even want to kill some of those and/or shutdown services in
order to relieve some stress from the machine until it recovers.
2) I usually have the following in my ceph.conf. This lets the scrubbing only
run between midnight and 6 AM (hopefully the time of least demand; adjust as
necessary) - and with the lowest priority.
#Reduce impact of scrub.
osd_disk_thread_ioprio_priority = 7
osd_disk_thread_ioprio_class = "idle"
osd_scrub_end_hour = 6
3) The Scrubbing begin and end hour will always work. The low priority mode,
however, works (AFAIK!) only with CFQ I/O Scheduler. Show your current
scheduler like this (replace sda with your device):
cat /sys/block/sda/queue/scheduler
You can also echo to this file to set a different scheduler.
With these settings you can perhaps alleviate the problem so far, that the
scrubbing runs over many nights until it finished. Again, AFAIK, it doesnt have
to finish in one night. It will continue the next night and so on.
The Ceph experts say scrubbing is important. Don't know why, but I just believe
them. They've built this complex stuff after all :-)
Thus, you can use "noscrub"/"nodeepscrub" to quickly get a hung server back to
work, but you should not let it run like this forever and a day.
Hope this helps at least a bit.
BR,
Ranjan
Am 22.08.2017 um 15:20 schrieb Ramazan Terzi:
Hello,
I have a Ceph Cluster with specifications below:
3 x Monitor node
6 x Storage Node (6 disk per Storage Node, 6TB SATA Disks, all disks have SSD
journals)
Distributed public and private networks. All NICs are 10Gbit/s
osd pool default size = 3
osd pool default min size = 2
Ceph version is Jewel 10.2.6.
My cluster is active and a lot of virtual machines running on it (Linux and
Windows VM's, database clusters, web servers etc).
During normal use, cluster slowly went into a state of blocked requests.
Blocked requests periodically incrementing. All OSD's seems healthy. Benchmark,
iowait, network tests, all of them succeed.
Yerterday, 08:00:
$ ceph health detail
HEALTH_WARN 3 requests are blocked > 32 sec; 3 osds have slow requests
1 ops are blocked > 134218 sec on osd.31
1 ops are blocked > 134218 sec on osd.3
1 ops are blocked > 8388.61 sec on osd.29
3 osds have slow requests
Todat, 16:05:
$ ceph health detail
HEALTH_WARN 32 requests are blocked > 32 sec; 3 osds have slow requests
1 ops are blocked > 134218 sec on osd.31
1 ops are blocked > 134218 sec on osd.3
16 ops are blocked > 134218 sec on osd.29
11 ops are blocked > 67108.9 sec on osd.29
2 ops are blocked > 16777.2 sec on osd.29
1 ops are blocked > 8388.61 sec on osd.29
3 osds have slow requests
$ ceph pg dump | grep scrub
dumped all in format plain
pg_stat objects mip degr misp unf bytes log disklog state
state_stamp v reported up up_primary acting
acting_primary last_scrub scrub_stamp last_deep_scrub deep_scrub_stamp
20.1e 25183 0 0 0 0 98332537930 3066 3066
active+clean+scrubbing 2017-08-21 04:55:13.354379 6930'23908781
6930:20905696 [29,31,3] 29 [29,31,3] 29 6712'22950171
2017-08-20 04:46:59.208792 6712'22950171 2017-08-20 04:46:59.208792
Active scrub does not finish (about 24 hours). I did not restart any OSD
meanwhile.
I'm thinking set noscrub, noscrub-deep, norebalance, nobackfill, and norecover
flags and restart 3,29,31th OSDs. Is this solve my problem? Or anyone has
suggestion about this problem?
Thanks,
Ramazan
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
