----- Le 7 Avr 15, à 14:57, lijian <blacker1...@163.com> a écrit :
> Haomai Wang, > the mon_osd_down_out_interval is 300, please refer to my settings, and I use > the > cli 'service ceph stop osd.X' to stop a osd > the pg status change to remap,backfill and recovering ... immediately > so other something wrong with my settings or operation? Hi, >From what daemon you get the mon_osd_down_out_interval value ? Is it from mon or osd ? Stephane. > Thanks, > Jian Ji > At 2015-04-07 20:38:29, "Haomai Wang" <haomaiw...@gmail.com> wrote: > >Whatever the version you tested, ceph won't recover data when you > >manually stop osd immediately. And it will trigger mark down osd out > >when it reach "mon_osd_down_out_interval" seconds. > >On Tue, Apr 7, 2015 at 8:33 PM, lijian <blacker1...@163.com> wrote: > >> Hi, > >> The recovering start delay 300s after I stop a osd and the osd status > >> change > >> from in to out, the test ENV is Ceph 0.80.7 > >> But I test in ceph 0.87.1, the recovering start immediately after I stop a > >> OSD,all the settings is the default value,the following is mon_osd* > >> settings > >> in my test ENV: > >> "mon_osd_laggy_halflife": "3600", > >> "mon_osd_laggy_weight": "0.3", > >> "mon_osd_adjust_heartbeat_grace": "true", > >> "mon_osd_adjust_down_out_interval": "true", > >> "mon_osd_auto_mark_in": "false", > >> "mon_osd_auto_mark_auto_out_in": "true", > >> "mon_osd_auto_mark_new_in": "true", > >> "mon_osd_down_out_interval": "300", > >> "mon_osd_down_out_subtree_limit": "rack", > >> "mon_osd_min_up_ratio": "0.3", > >> "mon_osd_min_in_ratio": "0.3", > >> "mon_osd_max_op_age": "32", > >> "mon_osd_max_split_count": "32", > >> "mon_osd_allow_primary_temp": "false", > >> "mon_osd_allow_primary_affinity": "false", > >> "mon_osd_full_ratio": "0.95", > >> "mon_osd_nearfull_ratio": "0.85", > >> "mon_osd_report_timeout": "45000", > >> "mon_osd_min_down_reporters": "50", > >> "mon_osd_min_down_reports": "150", > >> "mon_osd_force_trim_to": "0", > >> so when the recovering start? why they are different with the two Ceph > >> version, or someting wrong with my settings > >> Thanks! > >> Jian Li > >> _______________________________________________ > >> ceph-users mailing list > >> ceph-users@lists.ceph.com > >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > >-- > >Best Regards, > >Wheat > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
