Just wondering if this was ever resolved �C I am seeing the exact same issue 
when I moved from Centos 6.5 firefly to Centos7 on giant release using 
“ceph-deploy osd prepare . . . ” the script fails to umount and then posts a  
device is busy message. Details are below in yang bin18’s posting below. Ubuntu 
Trusty with giant seems OK. I have redeployed the cluster and also tried 
deploying on virtual machines as well as physical ones. Setup is minimal 3 x 
OSD nodes with one monitor node.



From: ceph-users [mailto:ceph-users-boun...@lists.ceph.com] On Behalf Of 
yang.bi...@zte.com.cn
Sent: Monday, December 22, 2014 2:58 AM
To: Karan Singh
Cc: ceph-users
Subject: [ceph-users] 答复: Re: can not add osd

Hi

I have deploied ceph osd  according official Ceph docs,and the same error came 
out again.




发件人:         Karan Singh <karan.si...@csc.fi<mailto:karan.si...@csc.fi>>
收件人:         yang.bi...@zte.com.cn<mailto:yang.bi...@zte.com.cn>,
抄送:        ceph-users 
<ceph-users@lists.ceph.com<mailto:ceph-users@lists.ceph.com>>
日期:         2014/12/16 22:51
主题:        Re: [ceph-users] can not add osd
________________________________



Hi

You logs does not provides much information , if you are following any other 
documentation for Ceph , i would recommend you to follow official Ceph docs.

http://ceph.com/docs/master/start/quick-start-preflight/



****************************************************************
Karan Singh
Systems Specialist , Storage Platforms
CSC - IT Center for Science,
Keilaranta 14, P. O. Box 405, FIN-02101 Espoo, Finland
mobile: +358 503 812758
tel. +358 9 4572001
fax +358 9 4572302
http://www.csc.fi/
****************************************************************

On 16 Dec 2014, at 09:55, yang.bi...@zte.com.cn<mailto:yang.bi...@zte.com.cn> 
wrote:

hi

When i execute "ceph-deploy osd prepare node3:/dev/sdb",always come out err 
like this :

[node3][WARNIN] INFO:ceph-disk:Running command: /bin/umount -- 
/var/lib/ceph/tmp/mnt.u2KXW3
[node3][WARNIN] umount: /var/lib/ceph/tmp/mnt.u2KXW3: target is busy.

Then i execute "/bin/umount -- /var/lib/ceph/tmp/mnt.u2KXW3",result is ok.

--------------------------------------------------------
ZTE Information Security Notice: The information contained in this mail (and 
any attachment transmitted herewith) is privileged and confidential and is 
intended for the exclusive use of the addressee(s).  If you are not an intended 
recipient, any disclosure, reproduction, distribution or other dissemination or 
use of the information contained is strictly prohibited.  If you have received 
this mail in error, please delete it and notify us immediately.



_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com<mailto:ceph-users@lists.ceph.com>
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com




--------------------------------------------------------

ZTE Information Security Notice: The information contained in this mail (and 
any attachment transmitted herewith) is privileged and confidential and is 
intended for the exclusive use of the addressee(s).  If you are not an intended 
recipient, any disclosure, reproduction, distribution or other dissemination or 
use of the information contained is strictly prohibited.  If you have received 
this mail in error, please delete it and notify us immediately.



_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

Reply via email to