thank you very much for the responses!
On Wed, Jul 16, 2014 at 5:02 PM, Paul Santos <p...@fsol.org> wrote: > In my test cluster in systems with similar RAID cards, I create > single-disk RAID-0 volumes. > > That does the trick. > > > > Paul > > > > *From:* ceph-users [mailto:ceph-users-boun...@lists.ceph.com] *On Behalf > Of *Robert Fantini > *Sent:* Wednesday, July 16, 2014 1:55 PM > *To:* ceph-users@lists.ceph.com > *Subject:* [ceph-users] PERC H710 raid card > > > > I've 2 dell systems with PERC H710 raid cards. Those are very good end > cards , but do not support jbod . > > They support raid 0, 1, 5, 6, 10, 50, 60 . > > lspci shows them as: LSI Logic / Symbios Logic MegaRAID SAS 2208 > [Thunderbolt] (rev 05) > > The firmware Dell uses on the card does not support jbod. > > My question is how can this be best used for Ceph? Or should it not be > used? > > >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
