Robert,
We use those cards here in our Dell R-720 servers.
We just ended up creating a bunch of single disk RAID-0 units, since
there was no jbod option available.
Shain
On 07/16/2014 04:55 PM, Robert Fantini wrote:
I've 2 dell systems with PERC H710 raid cards. Those are very good end
cards , but do not support jbod .
They support raid 0, 1, 5, 6, 10, 50, 60 .
lspci shows them as: LSI Logic / Symbios Logic MegaRAID SAS 2208
[Thunderbolt] (rev 05)
The firmware Dell uses on the card does not support jbod.
My question is how can this be best used for Ceph? Or should it not be
used?
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
Shain Miley | Manager of Systems and Infrastructure, Digital Media |
smi...@npr.org | 202.513.3649
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
