On Sun, 18 Aug 2013, Mika?l Cluseau wrote: > Hi, > > troubles with ceph_init (after a test reboot) > > # ceph_init restart osd > # ceph_init restart osd.0 > /usr/lib/ceph/ceph_init.sh: osd.0 not found (/etc/ceph/ceph.conf defines > mon.xxx , /var/lib/ceph defines mon.xxx) > 1 # ceph-disk list > [...] > /dev/sdc : > /dev/sdc1 ceph data, prepared, cluster ceph, osd.0 > /dev/sdd : > /dev/sdd1 ceph data, prepared, cluster ceph, osd.1 > /dev/sde : > /dev/sde1 ceph data, prepared, cluster ceph, osd.2 > /dev/sdf : > /dev/sdf1 ceph data, prepared, cluster ceph, osd.3 > /dev/sdg : > /dev/sdg1 ceph data, prepared, cluster ceph, osd.4 > /dev/sdh : > /dev/sdh1 ceph data, prepared, cluster ceph, osd.5 > > I see at the end of ceph_init taht there's a ceph-disk activate-all, but it > does nothing I can see: > > # ceph_init start osd.0 > /usr/lib/ceph/ceph_init.sh: osd.0 not found (/etc/ceph/ceph.conf defines > mon.xxx , /var/lib/ceph defines mon.xxx) > 1 # ceph-disk activate-all > # mount |grep ceph > /dev/mapper/ssd1-ceph--mon on /var/lib/ceph/mon/ceph-xxx type ext4 > (rw,noatime,nodiratime)
The ceph-disk activate-all command is looking for partitions that are marked with the ceph type uuid. Maybe the jouranls are missing? What does ceph-disk -v activate /dev/sdc1 say? Or ceph-disk -v activate-all Where does the 'journal' symlink in the ceph data partitions point to? sage _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
