Hi,
troubles with ceph_init (after a test reboot)
# ceph_init restart osd
# ceph_init restart osd.0
/usr/lib/ceph/ceph_init.sh: osd.0 not found (/etc/ceph/ceph.conf defines
mon.xxx , /var/lib/ceph defines mon.xxx)
1 # ceph-disk list
[...]
/dev/sdc :
/dev/sdc1 ceph data, prepared, cluster ceph, osd.0
/dev/sdd :
/dev/sdd1 ceph data, prepared, cluster ceph, osd.1
/dev/sde :
/dev/sde1 ceph data, prepared, cluster ceph, osd.2
/dev/sdf :
/dev/sdf1 ceph data, prepared, cluster ceph, osd.3
/dev/sdg :
/dev/sdg1 ceph data, prepared, cluster ceph, osd.4
/dev/sdh :
/dev/sdh1 ceph data, prepared, cluster ceph, osd.5
I see at the end of ceph_init taht there's a ceph-disk activate-all, but
it does nothing I can see:
# ceph_init start osd.0
/usr/lib/ceph/ceph_init.sh: osd.0 not found (/etc/ceph/ceph.conf defines
mon.xxx , /var/lib/ceph defines mon.xxx)
1 # ceph-disk activate-all
# mount |grep ceph
/dev/mapper/ssd1-ceph--mon on /var/lib/ceph/mon/ceph-xxx type ext4
(rw,noatime,nodiratime)
Anything I missed ?
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
