Hi John, I have a feeling that I am missing something. Previously when I succeeded with bobtail with mkcephfs, I mounted the /dev/sdb1 partitions. There is nothing mentioned in the blog about it though.
Say I have 3 nodes ceph201 ceph202 and ceph 203. Each has a /dev/sdb1 partition formatted as xfs. Do I need to mount them in a particular directory prior running the command or ceph-deploy would take care of it? On Thu, May 30, 2013 at 8:17 PM, John Wilkins <john.wilk...@inktank.com>wrote: > Dewan, > > I encountered this too. I just did umount and reran the command and it > worked for me. I probably need to add a troubleshooting section for > ceph-deploy. > > On Fri, May 24, 2013 at 4:00 PM, John Wilkins <john.wilk...@inktank.com> > wrote: > > ceph-deploy does have an ability to push the client keyrings. I > > haven't encountered this as a problem. However, I have created a > > monitor and not seen it return a keyring. In other words, it failed > > but didn't give me a warning message. So I just re-executed creating > > the monitor. The directory from where you execute "ceph-deploy mon > > create" should have a ceph.client.admin.keyring too. If it doesn't, > > you might have had a problem creating the monitor. I don't believe you > > have to push the ceph.client.admin.keyring to all the nodes. So it > > shouldn't be barking back unless you failed to create the monitor, or > > if gatherkeys failed. > > > > On Thu, May 23, 2013 at 9:09 PM, Dewan Shamsul Alam > > <dewan.sham...@gmail.com> wrote: > >> I just found that > >> > >> #ceph-deploy gatherkeys ceph0 ceph1 ceph2 > >> > >> works only if I have bobtail. cuttlefish can't find ceph.client.admin. > >> keyring > >> > >> and then when I try this on bobtail, it says, > >> > >> root@cephdeploy:~/12.04# ceph-deploy osd create ceph0:/dev/sda3 > >> ceph1:/dev/sda3 ceph2:/dev/sda3 > >> ceph-disk: Error: Device is mounted: /dev/sda3 > >> Traceback (most recent call last): > >> File "/usr/bin/ceph-deploy", line 22, in <module> > >> main() > >> File "/usr/lib/pymodules/python2.7/ceph_deploy/cli.py", line 112, in > main > >> return args.func(args) > >> File "/usr/lib/pymodules/python2.7/ceph_deploy/osd.py", line 293, in > osd > >> prepare(args, cfg, activate_prepared_disk=True) > >> File "/usr/lib/pymodules/python2.7/ceph_deploy/osd.py", line 177, in > >> prepare > >> dmcrypt_dir=args.dmcrypt_key_dir, > >> File "/usr/lib/python2.7/dist-packages/pushy/protocol/proxy.py", line > 255, > >> in <lambda> > >> (conn.operator(type_, self, args, kwargs)) > >> File "/usr/lib/python2.7/dist-packages/pushy/protocol/connection.py", > line > >> 66, in operator > >> return self.send_request(type_, (object, args, kwargs)) > >> File > "/usr/lib/python2.7/dist-packages/pushy/protocol/baseconnection.py", > >> line 323, in send_request > >> return self.__handle(m) > >> File > "/usr/lib/python2.7/dist-packages/pushy/protocol/baseconnection.py", > >> line 639, in __handle > >> raise e > >> pushy.protocol.proxy.ExceptionProxy: Command '['ceph-disk-prepare', > '--', > >> '/dev/sda3']' returned non-zero exit status 1 > >> root@cephdeploy:~/12.04# > >> > >> > >> > >> > >> On Thu, May 23, 2013 at 10:49 PM, Dewan Shamsul Alam > >> <dewan.sham...@gmail.com> wrote: > >>> > >>> Hi, > >>> > >>> I tried ceph-deploy all day. Found that it has a python-setuptools as > >>> dependency. I knew about python-pushy. But is there any other > dependency > >>> that I'm missing? > >>> > >>> The problem I'm getting are as follows: > >>> > >>> #ceph-deploy gatherkeys ceph0 ceph1 ceph2 > >>> returns the following error, > >>> Unable to find /etc/ceph/ceph.client.admin.keyring on ['ceph0', > 'ceph1', > >>> 'ceph2'] > >>> > >>> Once I got passed this, I don't know why it works sometimes. I have > been > >>> following the exact steps as mentioned in the blog. > >>> > >>> Then when I try to do > >>> > >>> ceph-deploy osd create ceph0:/dev/sda3 ceph1:/dev/sda3 ceph2:/dev/sda3 > >>> > >>> It gets stuck. > >>> > >>> I'm using Ubuntu 13.04 for ceph-deploy and 12.04 for ceph nodes. I just > >>> need to get the cuttlefish working and willing to change the OS if it > is > >>> required. Please help. :) > >>> > >>> Best Regards, > >>> Dewan Shamsul Alam > >> > >> > >> > >> _______________________________________________ > >> ceph-users mailing list > >> ceph-users@lists.ceph.com > >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > >> > > > > > > > > -- > > John Wilkins > > Senior Technical Writer > > Intank > > john.wilk...@inktank.com > > (415) 425-9599 > > http://inktank.com > > > > -- > John Wilkins > Senior Technical Writer > Intank > john.wilk...@inktank.com > (415) 425-9599 > http://inktank.com >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
