Hi Matt -
Sorry, I just spotted at the end of your message that you are using python
2.7.3. But the modules are installing into the python2.6 directories. I
don't know why that would be happening, and we'll have to dig into more.
Python is tripping over incompatible syntax for some reason.
Cheers,
Gary
On May 17, 2013, at 1:41 PM, Gary Lowell wrote:
> Hi Matt -
>
>
> I see in the message below that you are using python 2.6. Ceph-deploy may
> have some syntax that is incompatible with that version of python. On wheezy
> we tested with the default python 2.7.3 interpreter. You might try using the
> newer interpreter, we will also do so more testing to see if we can get
> ceph-deploy working with python 2.6.
>
> Cheers,
> Gary
>
>
> On May 17, 2013, at 6:23 AM, Matt Chipman wrote:
>
>> Thanks Gary,
>>
>> after you throwing me those clues I got furthur but it still isnt working.
>> It seems there are no i386 deb "python-pushy" packages in either of those
>> ceph repo's. I also attempted using PIP and got pushy installed but the
>> ceph-deploy debs still refused to install.
>>
>> I built another VM with 64bit Debian 7 and the packages were found and
>> installed however there is an error on compiling during install.
>>
>> any ideas?
>>
>> cheers
>>
>> -Matt
>>
>> administrator@ceph-admin:~$ sudo aptitude install ceph-deploy
>> The following NEW packages will be installed:
>> ceph-deploy python-pushy{a}
>> 0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
>> Need to get 53.3 kB of archives. After unpacking 328 kB will be used.
>> Do you want to continue? [Y/n/?]
>> Get: 1 http://ceph.com/debian-cuttlefish/ wheezy/main python-pushy amd64
>> 0.5.1-1 [30.9 kB]
>> Get: 2 http://ceph.com/debian-cuttlefish/ wheezy/main ceph-deploy all 0.1-1
>> [22.4 kB]
>> Fetched 53.3 kB in 1s (33.2 kB/s)
>> Selecting previously unselected package python-pushy.
>> (Reading database ... 38969 files and directories currently installed.)
>> Unpacking python-pushy (from .../python-pushy_0.5.1-1_amd64.deb) ...
>> Selecting previously unselected package ceph-deploy.
>> Unpacking ceph-deploy (from .../ceph-deploy_0.1-1_all.deb) ...
>> Setting up python-pushy (0.5.1-1) ...
>> Setting up ceph-deploy (0.1-1) ...
>> Processing triggers for python-support ...
>> Compiling /usr/lib/pymodules/python2.6/ceph_deploy/test/test_cli.py ...
>> SyntaxError: ('invalid syntax',
>> ('/usr/lib/pymodules/python2.6/ceph_deploy/test/test_cli.py', 44, 26, '
>> assert {p.basename for p in tmpdir.listdir()} == set()\n'))
>>
>> Compiling /usr/lib/pymodules/python2.6/ceph_deploy/test/test_cli_new.py ...
>> SyntaxError: ('invalid syntax',
>> ('/usr/lib/pymodules/python2.6/ceph_deploy/test/test_cli_new.py', 33, 26, "
>> assert {p.basename for p in tmpdir.listdir()} == {'ceph.conf'}\n"))
>>
>>
>> administrator@ceph-admin:~$ ceph-deploy
>> Traceback (most recent call last):
>> File "/usr/bin/ceph-deploy", line 19, in <module>
>> from ceph_deploy.cli import main
>> File "/usr/lib/pymodules/python2.7/ceph_deploy/cli.py", line 1, in <module>
>> import pkg_resources
>> ImportError: No module named pkg_resources
>> administrator@ceph-admin:~$ python
>> Python 2.7.3 (default, Jan 2 2013, 13:56:14)
>> [GCC 4.7.2] on linux2
>>
>>
>>
>> On Fri, May 17, 2013 at 9:10 AM, Gary Lowell <glow...@sonic.net> wrote:
>> Hi Matt -
>>
>> Sounds like you installed ceph-deploy by downloading from
>> github.com/ceph/ceph-deploy, then running the bootstrap script.
>>
>> We have debian packages for ceph-deploy and python-pushy that are included
>> in the debian-cuttlefish repo, as well as
>> http://ceph.com/packages/ceph-deploy/debian. You can install python-push
>> from those locations with apt, or you can install via pip: sudo pip
>> python-pushy.
>>
>> Let me know if you continue to have problems.
>>
>> Cheers,
>> Gary
>>
>> On May 16, 2013, at 3:51 PM, Matt Chipman wrote:
>>
>>> hi,
>>> I used ceph-deploy successfully a few days ago but recently reinstalled my
>>> admin machine from the same instructions
>>> http://ceph.com/docs/master/rados/deployment/preflight-checklist/
>>>
>>> now getting the error below. Then I figured I'd just use the debs but they
>>> are missing the python-pushy dependancy. Debian 7.0
>>>
>>> Is there any way to solve either issue?
>>>
>>> thanks
>>>
>>> administrator@cephadmin:~$ ceph-deploy
>>> usage: ceph-deploy [-h] [-v | -q] [-n] [--overwrite-conf] [--cluster NAME]
>>> COMMAND ...
>>> ceph-deploy: error: too few arguments
>>> administrator@cephadmin:~$ ceph-deploy install ceph00
>>> Traceback (most recent call last):
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/client.py",
>>> line 383, in __init__
>>> self.modules = AutoImporter(self)
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/client.py",
>>> line 236, in __init__
>>> remote_compile = self.__client.eval("compile")
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/client.py",
>>> line 478, in eval
>>> return self.remote.eval(code, globals, locals)
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/connection.py",
>>> line 54, in eval
>>> return self.send_request(MessageType.evaluate, args)
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/baseconnection.py",
>>> line 315, in send_request
>>> m = self.__waitForResponse(handler)
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/baseconnection.py",
>>> line 420, in __waitForResponse
>>> m = self.__recv()
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/baseconnection.py",
>>> line 601, in __recv
>>> m = self.__istream.receive_message()
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/baseconnection.py",
>>> line 104, in receive_message
>>> return Message.unpack(self.__file)
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/message.py",
>>> line 96, in unpack
>>> header = read(file, Message.PACKING_SIZE)
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/message.py",
>>> line 60, in read
>>> raise IOError, "End of file"
>>> IOError: End of file
>>>
>>> [remote] sudo: no tty present and no askpass program specified
>>>
>>> Traceback (most recent call last):
>>> File "./ceph-deploy/ceph-deploy", line 9, in <module>
>>> load_entry_point('ceph-deploy==0.1', 'console_scripts', 'ceph-deploy')()
>>> File "/home/administrator/ceph-deploy/ceph_deploy/cli.py", line 112, in
>>> main
>>> return args.func(args)
>>> File "/home/administrator/ceph-deploy/ceph_deploy/install.py", line 202,
>>> in install
>>> sudo = args.pushy(get_transport(hostname))
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/client.py",
>>> line 583, in connect
>>> return PushyClient(target, **kwargs)
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/client.py",
>>> line 383, in __init__
>>> self.modules = AutoImporter(self)
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/client.py",
>>> line 236, in __init__
>>> remote_compile = self.__client.eval("compile")
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/client.py",
>>> line 478, in eval
>>> return self.remote.eval(code, globals, locals)
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/connection.py",
>>> line 54, in eval
>>> return self.send_request(MessageType.evaluate, args)
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/baseconnection.py",
>>> line 315, in send_request
>>> m = self.__waitForResponse(handler)
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/baseconnection.py",
>>> line 420, in __waitForResponse
>>> m = self.__recv()
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/baseconnection.py",
>>> line 601, in __recv
>>> m = self.__istream.receive_message()
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/baseconnection.py",
>>> line 104, in receive_message
>>> return Message.unpack(self.__file)
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/message.py",
>>> line 96, in unpack
>>> header = read(file, Message.PACKING_SIZE)
>>> File
>>> "/home/administrator/ceph-deploy/virtualenv/local/lib/python2.7/site-packages/pushy-0.5.1-py2.7.egg/pushy/protocol/message.py",
>>> line 60, in read
>>> raise IOError, "End of file"
>>> IOError: End of file
>>> administrator@cephadmin:~$
>>>
>>> _______________________________________________
>>> ceph-users mailing list
>>> ceph-users@lists.ceph.com
>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>
>>
>> _______________________________________________
>> ceph-users mailing list
>> ceph-users@lists.ceph.com
>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>
> _______________________________________________
> ceph-users mailing list
> ceph-users@lists.ceph.com
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
