EK-DCJ11-UG-Pre DCJ11 Microprocessor User's Guide says it will abort [the first processor guide on the shelf]
$4.5.2.2 (p4-7) Page Length Field ... "The block number of the virtual address is compared against the page length field to detect length errors" ... $4.7.1 MMR0 <14> Abort Page Length Error $4.7.1.1.2 Abort -- Page Length When descriptors exist as they do in the PAR / PDR pair it is usual to police them. A QL at the manual indicates no exception behaviour for kernel mode or an override. The behaviour may be model dependent, but if MMR0<14> is populated I should expect an abort -- you could code the abort ISR for desired behaviour and return It would be easier to build hardware without the checking, but harder to debug the system. Martin -----Original Message----- From: Paul Koning via cctalk [mailto:cctalk@classiccmp.org] Sent: 17 November 2023 18:16 To: cctalk@classiccmp.org Cc: Paul Koning <paulkon...@comcast.net> Subject: [cctalk] Address wrapping in PDP-11 MMU I'm working on some code where it would be handy to map the top of the I/O page along with the bottom of physical memory. An obvious hack is to point the APR to the I/O page address needed, then set the length so that the address modulo 2^22 also covers the low memory range. It seems from the architecture manual that this would work, and SIMH seems to do this (since it adds VA and PAR then masks with a 22 bit mask). Would this work on real hardware? paul
