So I was able to get the listing for the PROMs by using the HEX file of IMSAI BASIC 1.4 from.Rich Cini's website. I was able to then pull the Intel papertape file image using Teraterm to capture the log of the session while using to load BASIC into the IMSAI. I can use the log to make an ePROM-friendly file.
Imsai 8K basic fills 0000..1FDB and stores programs from 2000, so you need some RAM after IFFFh (8K). My IMSAI has an IMSAI SIO serial card. Bill On Thu, Jun 29, 2023, 8:36 AM Bill Degnan <billdeg...@gmail.com> wrote: > It's in the Imsai Basic manual as a choice for loading g the software. > > I had the ROM set (8 proms) but I must have overwritten them a long time > ago. > > So, I wanted to make a new set, hoping someone had the eprom files avail > so I could make. > > If not I will build a new setsome.other way. Does anyone have the > papertape image of IMSAI basic 1.3 or 1.4? > > Bill > > On Wed, Jun 28, 2023, 11:04 PM Doug Jackson via cctalk < > cctalk@classiccmp.org> wrote: > >> Wait !! - there was BASIC in ROM for the IMSAI? >> >> How was the memory laid out? What I/O devices did it expect? >> >> Does it run with a Z80 CPU, or only the 8080? >> >> Kindest regards, >> >> Doug Jackson >> >> em: d...@doughq.com >> ph: 0414 986878 >> >> >> >> On Thu, 29 Jun 2023 at 12:51, steve shumaker via cctalk < >> cctalk@classiccmp.org> wrote: >> >> > That would be the Imsai 8K BASIC? If so, I have the assembler listing >> > as part of the Imsai manual set. >> > >> > Steve >> > >> > On 6/28/23 7:43 PM, Bill Degnan via cctalk wrote: >> > > Anyone have the 2716 ePROM listing for IMSAI Basic. Version 1.4 or >> > > whatever. I once had it, can't find my copy. If not 2716, I'll take >> any >> > > listing that I can convert somehow. >> > > Thanks >> > > Bill >> > >> > >> >
