Chris --
I did something similar with my Gazelle images for use with the Gotek.
My images are in IMD which I then had to convert to HxC for use with the
FlashFloppy software. So, what I would try is TD0->IMD (using one of Dave's
tools) and then IMD->HxC using the HxC software for use with FF.
Rich
On 2/23/23, 9:04 AM, "Chris Zach via cctalk" <cctalk@classiccmp.org
<mailto:cctalk@classiccmp.org>> wrote:
Question: I'm starting to work on the concept of installing POS 3.2 on
my Pro380 and rather than burning a lot of floppies I'd rather just use
my Gotek with FlashFloppy.
First problem is this: The images are in lzh format, and when
uncompressed are TD0 format. Which I think is teledisk, is there a way
to convert those to the raw format used by Flashfloppy?
Ultimate goal is to get Pro/Decnet running, hook the 380 up to the
Ethernet here with my DECNA to the 11/73 running DEQNA, then try
sysgenning a version of RSX11M+ for the Pro that does not suck. Not sure
if anyone has tried this, or where they ran into roadblocks.
Thanks!
CZ
