I have a pretty good 3d printer, I.can at least try. I imagine the standard front panel cover clips should be easy enough, but the pdp8a needs something stronger with screws and bolts, right? I need to check the enclosure hardware documents
On Tue, Oct 11, 2022, 2:37 AM Vincent Slyngstad via cctalk < cctalk@classiccmp.org> wrote: > On 10/10/2022 11:00 PM, Adrian Stoness via cctalk wrote: > > theres 3d print models made of them theres the orig design with does not > > prit very well and a modified design thats better list forget where > > might be buried on this site? > > https://so-much-stuff.com/pdp8/repair/repair.php > > I tried to do one here: > https://so-much-stuff.com/pdp8/cad/3d.php > but I haven't actually printed or used it yet. (I have the original > parts, and no free access to a 3D printer at the moment.) > > Vince > > > On Mon, Oct 10, 2022 at 7:53 PM Bill Degnan via cctalk < > > cctalk@classiccmp.org> wrote: > > > >> Is there a 3D print gcode for the hardware that connects a PDP8a front > >> panel to the chassis? > >> > >> Is there anyone who has a spare clips/clamps hardware to attach a PDP 8a > >> console to the chassis? > >> > >> I picked up the donated PDP 8a mentioned earlier on this list, I got it > up > >> and running. I need to track down the hardware to attach the front > panel > >> to the chassis. I do have spares of the hardware that attaches the > ON/OFF > >> panel to the chassis. > >> > >> AS with all "free" donations it's the final mile that costs the big $$ > >> > >> Thanks > >> > >> Bill > >> > >
