Hi Tom, what do you think about this parts:
Microsoft Word - D5936.doc (mouser.at)[1] Looks like 0.09" diameter. With best regards Gerhard Zitat von Tom Hunter <ccth6...@gmail.com>:
Hi Gerhard, I used the following banana plugs: https://www.aliexpress.com/item/1005002907717547.html Please note that only about 30% of the plugs I received were a good fit. The rest I had to modify. I had to remove the barrel shaped contact spring and compress it carefully to open it up to make good contact with the sockets. I also soldered the barrel shaped contact spring onto the plug body. It is a lot of work to make the patch cables with plugs which don't quite fit, but with the modification the result is now neat and usable. I couldn't find anything else with a better fit. The original 0.1" taper pins are "unobtainium". Regards Tom On Sun, Mar 13, 2022 at 7:18 PM DI Gerhard Kreuzer via cctalk <cctalk@classiccmp.org> wrote:Hi, I also have an H500 waiting for restoration. Maybe anyone can give better winfos about the plugs/connectors of the patch cables. I didn't have any, I have to make new. With best regards Gerhard Zitat von cctalk-requ...@classiccmp.org: > Send cctalk mailing list submissions to > cctalk@classiccmp.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.classiccmp.org/mailman/listinfo/cctalk > or, via email, send a message with subject or body 'help' to > cctalk-requ...@classiccmp.org > > You can reach the person managing the list at > cctalk-ow...@classiccmp.org > > When replying, please edit your Subject line so it is more > specificthan "Re: Contents of cctalk digest..."
Links: ------ [1] https://www.mouser.at/datasheet/2/159/D5936-1514588.pdf
