I'm talking about this guy: https://www.ebay.com/itm/133957290061?hash=item1f307a084d%3Ag%3ASPMAAOSwTpJhr8DA&nma=true&si=Jv7lwO0W4lizYwsCX3KDWMC0wiA%253D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557
He's in the US. -----Original Message----- From: s shumaker [mailto:shuma...@att.net] Sent: Friday, January 14, 2022 2:02 PM To: William Sudbrink <wh.sudbr...@verizon.net>; 'General Discussion: On-Topic and Off-Topic Posts' <cctalk@classiccmp.org> Subject: Re: Retro Chip Tester Pro, US shopping basket? Ya except his web page say no US sales... is he being flexible if one asks nicely? Steve On 1/14/2022 9:16 AM, William Sudbrink wrote: > Oh, US source, no. You have to buy straight from Stephan. > But there is a guy on ebay who builds and sells them. > But you'll pay a premium. I considered it, but I like to build things myself. > > The parts scavenger hunt? Not so much. > > -----Original Message----- > From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of > William Sudbrink via cctalk > Sent: Friday, January 14, 2022 11:50 AM > To: 's shumaker' <shuma...@att.net>; 'General Discussion: On-Topic and > Off-Topic Posts' <cctalk@classiccmp.org> > Subject: RE: Retro Chip Tester Pro, US shopping basket? > > He just added 2708 programming to it. Which is extremely useful. > > -----Original Message----- > From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of s > shumaker via cctalk > Sent: Friday, January 14, 2022 11:20 AM > To: cctalk@classiccmp.org > Subject: Re: Retro Chip Tester Pro, US shopping basket? > > Seems like a very useful gadget. Any suggestions for a US source? > > Steve > > On 1/13/2022 1:18 PM, Santo Nucifora via cctalk wrote: >> Hi Bill, >> >> I have a Digikey shopping cart for most of the items and another for >> Mouser for the rest of the items but mine was Rev "i". I did this >> back in August and I looked at the cart and noticed that some of the >> items may have substitutes now. I know I had to do a few substitutes >> when I followed the BOM even back then. I'll post them here but >> please be careful and check the BOM from the RTC (Retro Chip Tester) Google >> site you were emailed >> against these carts. Again, you may have to make some substitutes and >> some of the other components may not line up exactly but that's the >> nature of these pre-created carts, unfortunately. It will at least >> give you a good start: Note, I ordered from a Digikey.ca site but I >> created an identical US cart for a friend in the US that was building one as >> well. >> Again, triple check everything. >> >> Digikey US cart: https://www.digikey.com/short/d9vrt54z >> Mouse CA cart for 4 items not at Digikey (but they may be there now?): >> https://www.mouser.ca/ProjectManager/ProjectDetail.aspx?AccessID=9e70 >> 7 >> cf7c4 >> >> BTW, good choice on a Christmas present. You will wonder how you did >> without it. >> Hope this helps, >> Santo >> >> On Thu, Jan 13, 2022 at 3:46 PM William Sudbrink via cctalk < >> cctalk@classiccmp.org> wrote: >> >>> In response to my wife's "Buy yourself a Christmas present" >>> direction, I've ordered a Retro Chip Tested Pro board. When you >>> purchase the board, you get a BOM and links to stored shopping >>> baskets for some European vendors. Has anyone built this in the US >>> and stored their basket with a US vendor? Rev 1.2k by the way, but >>> any basket would be helpful as the BOM differences between the >>> versions are listed. >>> >>> >>> >>> Thanks, >>> >>> Bill S. >>> >>> >>> >>> -- >>> This email has been checked for viruses by Avast antivirus software. >>> https://www.avast.com/antivirus >>> > > > -- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus