On 11/30/2021 2:04 PM, Fritz Mueller via cctalk wrote:
On 11/30/21 10:06 AM, Noel Chiappa via cctalk wrote:
From the blog of someone who got a KB11-A working, you'll really need KM11
cards...
On Nov 30, 2021, at 10:59 AM, Guy Sotomayor via cctalk <cctalk@classiccmp.org>
wrote:
I do still have KM11 boards and some overlays (I'd have to check to see if I
have the appropriate overlays for the 11/70). I don't unfortunately have any
light masks or full kits.
I built mine from a layout on Tom Uban’s site:
http://www.ubanproductions.com/museum.html
<http://www.ubanproductions.com/museum.html>. I have found the single long
board form factor convenient, but they don’t have nice light dividers and overlays
like Guy’s.
Agreed that at least one of these, as well as a hex extender card, are
absolutely essential if you need to debug CPU/MMU/FPU cards (which, given their
age, is nearly guaranteed unless you are getting them pre-checked/repaired from
another restorer.)
—FritzM.
Did you use that directly with ExpressPCB and order from ExpressPCB or
did you convert to more standard gerbers? (This thread has me
motiviated to maybe get my 11/45 running again next year, and verify or
fix my FP11-C)
[Note, I have also been corresponding with the OP on purchase of my 4
"spare" boards for an FP11-C]
JRJ
