> > 4) SD2SCSI > > Do you mean a device that emulates a SCSI drive with an SD card? Why > not just go out and purchase a SCSI2SD V5.1 - a little slower than the > newer ones, but works fine in my Sun, SGI and Intergraph Boxen. > > I also just bought one of the less expensive Androda SCSI emulators - > designed for Macs, really, but it might work and it is relatively > inexpensive. >
Yeah I likely will, it is on the list because I would prefer to trade > > 7) Unfomatted pertec controller (any bus) > > I have some old Pertec formatters that have no bus interface. Free to > good homes. Some were mouse houses for a while, but were subsequently > cleaned up reasonably well. Models F649-72 (2 of those) and F649-40. > Heavy to ship. > > In addition, I think I have a TC031, Pertec/QBus (I think) that I really > am not using. I tried it out once - I think the issue was that I had a > Pertec interface speed mismatch between it and the HP drive I have with > a Pertec interface (which also has issues with loading tape.) I > suspect it is formatted, however. > Thank you! I will look at that model number you provided. My Kennedy 9100 drive either needs a controller, or to go away. Damn thing weighs a ton and takes a lot of room. -Eric