torsdag 14 januari 2021 skrev Paul Koning via cctalk <cctalk@classiccmp.org >:
> > > > On Jan 14, 2021, at 1:42 PM, Chris Zach <c...@alembic.crystel.com> wrote: > > > > ... > > Is there a hardware emulator that can emulate RX50's from images to a > Pro? Been wondering that... As far as the releasnotes tell FlashFloppy by Keir Fraser support RX33 and RX50. https://github.com/keirf/FlashFloppy/blob/master/RELEASE_NOTES > > Perhaps David Gesswein's MFM emulator could be modified to do that. You > might ask him. I don't think it does so out of the box, though. The > signal frequencies are much lower than those of hard drives. > > Some others make products that claim to offer the capability, > https://www.drem.info is one (mentioned by David) and I also found this > https://www.shopfloorautomations.com/hardware/floppy-connect/ . I know > nothing about either. Standard PC floppy formats use 9 sectors per track > but normal drives can handle 10-sector DEC formats too. If the emulators > are done right they should handle that as well, but of course you'd have to > confirm that. > > paul > >
