On Thu, 22 Oct 2020, Chuck Guzis via cctalk wrote: > > A variation on the connector idea: use an insulation-displacement type > > connector (the kind that you mount onto a flat cable assembly) without > > the cable. Just snap on the cover over the i-d pins and you have a > > fully insulated assembly with the pins acting as spring clamps for the > > jumper pins. > > That's not terribly useful when you have only one or two positions to > protect, is it?
Following the idea however you can use a wire-to-board connector housing like from Harwin M20 series with just empty contacts inserted. They are widely available and start from 1x1 even. <https://www.harwin.com/connectors-hardware/pcb-connectors/2-54mm-pitch-pcb-connectors/> Maciej
