Check to see if JMicron's sata(drive) to ide(host) is suitable to your need. They also come with bi-directional switch to select which end goes to the mainboard. ypu can connect a big ssd or a sata to M2 adapter. But be aware they have two problems: - they need +5V power supply, either from the fdd connector or from USB; - they do not get along with Sun Ultrasparc systems: the sata hdd is always read-only.
You can also get a pci sata controller. On Friday, August 28, 2020, Warner Losh via cctalk <cctalk@classiccmp.org> wrote: > On Fri, Aug 28, 2020 at 10:19 AM Al Kossow via cctalk < > cctalk@classiccmp.org> > wrote: > > > On 8/28/20 9:07 AM, Noel Chiappa via cctalk wrote: > > > I've decided that > > > I should see if there's an IDE emulator (using SD cards) available I > > could > > > switch to. > > You may want to use PATA disk-on-module. > > > > There's also a crap-ton of SATA<->PATA adapters that I've used to good > effect everywhere except in space constrained situations (think laptop). > > Warner >
