I have several Zynq boards that I’m using (or will be) for other projects but having a replacement for the 3174 would be nice.
TTFN - Guy > On Nov 18, 2019, at 9:51 AM, Dave Wade via cctalk <cctalk@classiccmp.org> > wrote: > > Chris, > I have several Spartan boards, no Zync... > ... but would be interested to see how it works... > Dave > >> -----Original Message----- >> From: cctalk <cctalk-boun...@classiccmp.org> On Behalf Of cw via cctalk >> Sent: 18 November 2019 17:43 >> To: cctalk@classiccmp.org >> Subject: FPGA based 3174 replacement >> >> As it happens I wrote a Verilog module last week for serializing and >> deserializing 3270 coax frames, without realizing someone had already done >> this with an arduino. What I’ve written is intended for a zynq device but is >> general enough to be used in other designs. >> >> At the moment I have petalinux installed and can send frames with a small >> test >> program and see them on my scope. A loop back configuration also seems to >> work. I haven’t build the coax driver circuit yet so I can’t be sure of it’s >> correct >> operation. >> >> I’d be willing to make this code available tonight. Although I’m not sure how >> many people have the right hardware lying around. >> >> Chris >
