I think you mean RX11. I'll see if I have any I can spare. Isn't the BC05L-15 folded up in the case? Or did they put a short one to the back of the box? I can't remember now.
There are 3 or so screws on on each side that hold the bottom of the box on. The same screw and holes are used for the slides. I'll look for slides also. Which are you on located?I know someone who was looking for a box last year. Are they the old Calcomp cast aluminum, or the newer DEC 70 class drives? The DEC ones can sometimes be converted to RX02s. I think the older (RX01 only) were the M7726 and M7727. The newer RX02 boards, M7744 and M7745, can be used for either. DISCLAIMER!! I'm taking the board numbers off the top of my head. They could be wrong. Paul On Sat, Nov 16, 2019 at 4:54 PM Fritz Mueller via cctalk < cctalk@classiccmp.org> wrote: > Hi all, > > I recently picked up a “tabletop” RX01 drive for cheaps. So now I’m in > the market for: > > - RK11 controller > - cables > - rack ears, rails (how was this done?) > - formatted media > > If anybody here might have any of this and like to work out a deal, feel > free to let me know off-list! > > thanks much, > —FritzM. > > >