On Sat, Jun 29, 2019 at 12:17 PM Al Kossow via cctalk <cctalk@classiccmp.org> wrote:
> I just finished taking pictures and dumping the firmware from a 730X > terminal > but it turns out it has a Starlan and not an Ethernet interface. It would > be > nice to get a firmware dump from an Ethernet card. A start of a 630 driver > is > in MAME. > Mine has a Starlan 10 adapter in it, which is apparently close enough to twisted-pair Ethernet that it can be bridged with one of AT&T's Starlan hubs, which is how I have it wired to my network. I'll see if I can dump the ROMs, but they're not socketed so it'll take a bit of surgery. I also have the ISDN adapter, which has socketed EPROMs. - Josh > > http://bitsavers.org/pdf/att/730/730X > > It also appears the keyboards for the 630 and 730 aren't backwards > compatible > with the other 6xx products and the 5620. 5620 keyboards need -12v which > the 630 or 730 > don't supply, and the 610 keyboard doesn't appear to work either. Josh > took a couple > of pictures of his 630 keyboard and even though they look similar, the > earlier keyboards > were made by Teletype and the 630 is made by Keytronic. > > >
