On Jun 12, 2019, at 10:47 AM, shadoooo via cctech wrote:

> maybe there's a short between RXD and TXD, or possibly the GND is
> unconnected...
> This could cause an echo on the cable, and while the console is echoing
> too, this give an infinite repetition, only ended by the limited console
> buffer size...

I think you got closest. There is apparently something problematic about the 
way modem control is wired through my cables. While I was arsing around, 
grasping at other sorts of proverbial straws, I ended up with the same cable 
plugged in with the ends the opposite way around and it started working fine. 
Swap ends again, the fault returns. I figured since the VAX end doesn't use 
modem or flow control, it wouldn't matter how they were or weren't wired. Wrong!


ok
bear.

-- 
until further notice

Reply via email to