Yes you can. Basically you can boot an image and then prepare the
volume on the hard drive and copy it over. I have a PDP11 page on my Classiccmp
site that walks through it. There’s also a long thread on the VCFE forums about
it.
classiccmp.org/cini/pdp11.htm
Get Outlook for iOS
On Thu, May 23, 2019 at 4:36 PM -0400, "Rod Smallwood via cctalk"
<cctalk@classiccmp.org> wrote:
Hi
I am working on getting my KDJ11-E based system up.
I have a CQD220A and a SCSI hard drive installed and formatted.
A serial connection to a Raspberry Pi soon brought up the console on the
PDP-11 using TU58FS.
Next will be a second serial line to allow TU58 emulation. SFSG
What is not clear is if I can get a bootable OS (RT, RSX or whatever)
image onto the Hard Drive using TU58FS.
Any advice as to if and how this could be done would be greatly
appreciated .
Rod Smallwood
--
