What version of VMS? Check the startup file (Systartup_v5.com or Systartup_vms.com) and see what's going on with the system before you change anything IYAM.
Using the editor you can comment out networking lines if you want to disable the DECNET commands. See if Multinet is installed, that's an easy way to create a stand-alone VAX that can connect to the internet. I can turn on my VAXstation 3100 if you want to check it out, I have it set as microvax3100.vintagecomputer.net but I don't leave it running if not in use. Also, make a backup to the backup drive so you can restore to what it was originally. Bill On Thu, May 2, 2019 at 6:25 PM Adrian Graham via cctalk < cctalk@classiccmp.org> wrote: > > > On 2 May 2019, at 23:16, Carlos E Murillo-Sanchez via cctalk < > cctalk@classiccmp.org> wrote: > > > > Hello; > > > > In my quest to try to see what the problem is with my vs/60, I want to > convert it into a networked stand-alone machine, i.e. not use clustering at > all. What is the easiest way to do this? I still want it to do DECnet and > TCPIP. > > > > Carlos. > > > > > The easiest way is to turn clustering off, so if the machine’s running > press the HALT button then from the Dead Sergeant prompt (>>>) do this: > > >>> B/1 (or B/R5:1) > SYSBOOT> SET VAXCLUSTER 0 > SYSBOOT> C > > This will boot as a single node and let you log in assuming your > SYSUAF.DAT isn’t on a clustered drive. If it is add this command after SET > VAXCLUSTER 0: > > SYSBOOT> SET UAFALT 1 > > This bypasses the main system authorisation file and lets you log in as > SYSTEM with no password. Usually. The caveat emptor here is if the previous > owners also used a SYSUAF_ALT file in which case it gets a little more > complex. > > -- > adrian/witchy > Owner of Binary Dinosaurs, the UK's biggest private home computer > collection? > t: @binarydinosaurs f: facebook.com/binarydinosaurs > w: www.binarydinosaurs.co.uk > > > > >
