On 06/24/2018 10:46 PM, Jon Elson wrote: > On 06/24/2018 06:29 PM, Bill Gunshannon via cctalk wrote: >> >> On 06/23/2018 06:29 PM, Jon Elson via cctalk wrote: >>> On 06/23/2018 01:32 PM, Lyle Bickley via cctalk wrote: >>>> There's more "stuff" that you can see from the pictures below. All the >>>> PDP-11 "boxes" and boards look to be good cosmetically. >>>> >>>> Photos here: >>>> https://photos.google.com/share/AF1QipMAvVBdhz20-z7l6W9JXhBB0k3ggw0HWveHctEup826NNIWPAxUlk1lbW-RY76zUQ?key=dkh2MFhieTVZQTlqeTZQelI2WU1OYXVpRFNweTN3 >>>> >>>> >>>> >>>> >>>> >>> There is a blue board with a blue handle that is a Q-bus Andromeda >>> disk controller. >>> It will, IIRC, run one floppy and up to 2 MFM hard drives. I had one >>> on a uVAX-II a LONG time ago. >>> >> Yes, but not without the "Personality Modules" that connect to the 50 >> pin >> connector. I have two boards but only 2 MFM and 1 5.25 floppy adapter. >> >> > The personality module is JUST connectors and traces. So, you could > build one with wire wrap wire or whatever. I used to have the > schematic of that module here, may still have it around. >
The WPC5W is a bit more than connectors and traces as it has an AM24LS31 on the board and requires power. But, if you have the schematic for the WPC8F I would love a copy. bill
