As Ed mentioned, I believe the CISC machines will need the ENQ/ACK.
I thought that speed-sense was only on the CR. But the ENQ/ACK will happen
every 80 chars sent.
I think you can wait on it because it will timeout, and continue.
Or when output pauses, you could type Control-F, as I recall.
If you cannot get your hands on Reflection (
https://www.microfocus.com/products/reflection/ )
(took me a moment to find it, now that microfocus controls it)
or Minisoft Win92/Secure92 (www.minisoft.com),
or an hp terminal, you could try QC-Term.
http://www.3kranger.com/Atmar/AICS_qcterm.shtm
Keven Miller
----- Original Message -----
From: "Mike Loewen via cctalk" <cctalk@classiccmp.org>
To: <cctalk@classiccmp.org>
Sent: Mon 07 May 2018 09:36 PM
Subject: HP 3000/37 console
Does anyone know if a non-HP terminal will work as the console for a HP
3000 Series 37? The power-on self-test uses ENQ/ACK to speed sense, but
the manual also implies that it will sense speed from a <CR>. On my 37,
the TIC self-test passes up to the point where it talks to the terminal,
but fails to to speed sense.
Mike Loewen mloe...@cpumagic.scol.pa.us
Old Technology http://q7.neurotica.com/Oldtech/
