I keep them all. Not counting the bad ones in the SS1 and 2, I have 7.
I can send them to you. I don't mind pick up the shipping costs for
something small like that. But the $70 that is it going to cost to ship
the SS20 to its new home is another matter.
alan
On 4/27/18 3:33 PM, systems_glitch wrote:
You can always send me the dead modules and I'll rebuild them
(GlitchWorks == me, my wife sometimes helps with assembly). Whatever
you do, don't throw out the dead NVRAMs -- I'll buy them or pay for
you to ship them or whatever, they're not making more and they're the
only solution that's 100% compatible.
Yeah, the "still works but pukes errors" is the typical symptom of the
newer, slightly incompatible 48T02s in Sun machines. I don't recall if
mine kept accurate time with the newer modules.
Thanks,
Jonathan
On Fri, Apr 27, 2018 at 6:28 PM, Alan Perry via cctalk
<cctalk@classiccmp.org <mailto:cctalk@classiccmp.org>> wrote:
The ones from Mouser work well enough in every system that I have
used them in. I still get the IDPROM corrupt message on boot on
some systems, but it holds the MAC and the systems boot without
intervention.
I tried to repair a few and botched most of them. I know that I
should be using the GlitchWorks stuff, but it has been easier to
just buy something that I can plug in.
alan
On 4/27/18 3:15 PM, systems_glitch via cctalk wrote:
Don't get the new MK48T02/MK48T08s from Mouser et al, they're
not fully
compatible. They will retain NVRAM but the clock part is
different and
you'll get an error on that (system won't autoboot). Rebuild
your old
NVRAM! I made up some little boards to make the repair cleaner
and faster
to do (I had about 50 NVRAMs to repair):
http://www.glitchwrks.com/2017/08/01/gw-48t02-1
<http://www.glitchwrks.com/2017/08/01/gw-48t02-1>
There are other guides for tacking on a coin cell holder
without cutting
off the entire top encapsulation, but if you do that, it may
not fit under
SBus cards if you're doing it on a system that puts SBus slots
over the
NVRAM.
Thanks,
Jonathan
On Fri, Apr 27, 2018 at 6:03 PM, Glen Slick via cctalk <
cctalk@classiccmp.org <mailto:cctalk@classiccmp.org>> wrote:
On Fri, Apr 27, 2018 at 1:55 PM, Alan Perry via cctalk
<cctalk@classiccmp.org <mailto:cctalk@classiccmp.org>> wrote:
- SPARCstation 1. Chassis is intact. It has a bad
IDPROM; aside from that
it passes onboard diagnostics. It has 12M memory, no
HDD now, and a 3.5"
floppy drive. It has no SBus cards. Aside from the
IDPROM, it doesn't
have any issues (but I haven't run an OS on it yet).
Like the SS2, it
needs a bath. A small portion of the plastic cover
over the rear of the
case is broken off.
What are these "actual parts expenses"? IDPROMs are
around $25 on Mouser.
SCSI HDDs start around $70 shipped on eBay and SCSI2SD
are $60 plus
shipping to me plus the SD price. Given the price of
25 year old HDDs
with
a stated service life of 5 years (according to one
spec sheet that I
read),
SCSI2SD looks pretty attractive.
When you say IDPROM, is that a Dallas built-in battery
NVRAM type of
thing? I have an SS1 with a dead NVRAM thing. Are the
currently
available versions of those new at Mouser fully
compatible? Those are
one of those things that the new versions aren't always fully
compatible with the old versions for some systems, even
though they
are supposed to be.
My SS1 is also in the Seattle area. If there is much
demand for those
it's probably one of those systems I'll never get around
to doing
anything with it myself. I also have a 4/110. Those seem
to be a lot
less common, and maybe more collectible.
