If it IS SA800/850, then FPADAP,
http://www.dbit.com/fdadap.html
is an easy way to handle the cabling.
The website say that they have 5 in stock,
so order immediately if you need it!
On Thu, 1 Feb 2018, Bill Gunshannon via cctalk wrote:
It doesn't guarantee that you will be able to read most (because of
shortcomings
in the PC floppy controller) but dbit.com offers an adapter called an
FDADAP that
lets you connect a 50 pin 8" disk to the PC controller. I have a couple
and they
work great.
I agree.
I always made my own cables, but I did mention [ABOVE] that FDADAP
is the easy way to handle the cabling.
First cable that I made, I used a solderless bread-board, and looking at
both pinouts, started placing wires.
Once I saw what I was ending up with, subsequent cables were a flat 34 pin
cable, that I peeled out a few wires, and very carefully held them in
place to crimp on a 50 pin connector.
