On 2018-01-23 7:42 PM, Al Kossow via cctalk wrote:
On 1/23/18 8:48 AM, Dave via cctalk wrote:
Hi Al,
What 9816 parts are required to run it? Do you already have the 9816 and 9121
drive? Also, is there a copy of CP/M-68K available somewhere for download?
Dave
On Monday, January 22, 2018, 1:13:08 PM CST, Al Kossow via cctalk
<cctalk@classiccmp.org> wrote:
A friend made an adapter board for HP's 26 and 34 pin 600rpm drives to standard
34 pin
that we should have soon. I was not able to read any of the disks with a normal
300rpm
drive, so the software has not been imaged yet.
I have an early 9122 that has the same board as a 9121 and was going to
retrofit the older firmware.
The piece I'd like to get is the little keyboard so the whole thing takes up
less space then using
a Nimitz keyboard.
There is one disk for CP/M-68K on the HP Museum site, but what I have is very
different (6 disks with additional .rel and src files) copyright 1984 Empirical
Research Group
I'm really hoping it can be recovered.
That's odd I have never had any trouble reading or creating diskettes
for my HP 600 RPM drives on PCs using 300 rpm drives, I mostly use an
old Panasonic PII Toughbook.
Paul.
