Fantastic, thanks. Bill On Wed, Jan 17, 2018 at 3:46 PM, Pete Lancashire via cctech < cct...@classiccmp.org> wrote:
> Found it !! > > http://www.picklesnet.com/burroughs/gallery/bpgb80.htm > > 4th picture top row. > > Yikes that was long ago > > -pete > > > On Wed, Jan 17, 2018 at 12:43 PM, Pete Lancashire <p...@petelancashire.com > > > wrote: > > > OK it is coming back to me, if I remember correctly these were used in > the > > B80 which were or were to be a replacement for the L/TC family > > there were either 5 or 8 of them that made up the CPU > > > > > > > > On Wed, Jan 17, 2018 at 12:14 PM, Mike Stein via cctech < > > cct...@classiccmp.org> wrote: > > > >> The L & TC series (among others?) used a number of those chips; I > *might* > >> even be able to look up what it did but I doubt that it'd be useful > >> information ;-) > >> > >> m > >> > >> ----- Original Message ----- > >> From: "Pete Lancashire via cctech" <cct...@classiccmp.org> > >> To: "william degnan" <billdeg...@gmail.com>; "General Discussion: > >> On-Topic Posts" <cct...@classiccmp.org> > >> Sent: Wednesday, January 17, 2018 1:19 PM > >> Subject: Re: help id a chip > >> > >> > >> > Burroughs > >> > > >> > One has to love the 1/8" spacing. > >> > > >> > I have a box of them from when I worked there. I may even have one of > >> the > >> > very rare test sockets. > >> > > >> > The division I was in was considering using the technology. I can't > >> > remember what actually used them. Way too long ago. > >> > The plant I was in built the B7xx family. > >> > > >> > I > >> > > >> > -pete > >> > > >> > On Wed, Jan 17, 2018 at 10:05 AM, william degnan via cctech < > >> > cct...@classiccmp.org> wrote: > >> > > >> >> Can someone tell me what chip this is? > >> >> > >> >> http://vintagecomputer.net/pictures/2017/Objects/P1010114.JPG > >> >> http://vintagecomputer.net/pictures/2017/Objects/P1010093.JPG > >> >> http://vintagecomputer.net/pictures/2017/Objects/P1010094.JPG > >> >> > >> >> (note ..94/94 show the item in a sealed in storage material) > >> >> > >> >> the underside consists of 4 sets of 12 pins plus the corner 3 pins, > as > >> >> shown on the top of the chip. > >> >> > >> >> thanks > >> >> > >> >> > >> > >> > > >
