On Thu, Dec 14, 2017 at 2:18 PM, william degnan <billdeg...@gmail.com> wrote:
> > > On Thu, Dec 14, 2017 at 2:10 PM, william degnan <billdeg...@gmail.com> > wrote: > >> >> On Thu, Dec 14, 2017 at 10:59 AM, John Welch via cctalk < >> cctalk@classiccmp.org> wrote: >> >>> Now that I have the 11/04 running the next step is to hook up to the >>> RL02. >>> >>> I need to run a cable from the M7762 to one of the connectors on the >>> back of the RL02. I have cabling stripped from a 11/04. >>> Is there a terminator that goes on the other connector on the RL02? The >>> machine that was stripped actually was a RL01, I hope the cable is the same >>> and if not someone will be able to advise me on that. >>> >>> Do I need to set any jumpers on the M7762? >>> >>> Are there any other things I should do the the RL02 prior to plugging it >>> into the wall and powering it on? >>> >>> Sincerely, >>> John Welch >>> >> >> Assuming you have a bridge adapter that goes between the flat cable and >> the drive cable. The bottom drive port should be terminated if you're not >> connecting to a 2nd drive. Here is how I learned what I needed: >> >> http://www.pdp-11.nl/peripherals/disk/rl-info.html >> >> Bill >> >> > The ROM part number should be 751A9, if you're using a 9312, that's the > ROM for the RL01/RL02. The command is DL0 or DL1. If you use "DL" it > assumes drive 0. You can boot off of any drive however. You can install > the ROM in any slot. > > Bill > > Sorry...any of the 4 bootstrap ROM sockets. (not slot *banging head against cabinet*) b
