On Tue, 5 Dec 2017, Mattis Lind wrote:
2017-12-05 16:51 GMT+01:00 Mike Loewen via cctalk <cctalk@classiccmp.org>:
On Tue, 5 Dec 2017, Mattis Lind wrote:
2017-12-05 16:26 GMT+01:00 Mike Loewen via cctalk <cctalk@classiccmp.org>:
On Tue, 5 Dec 2017, Mattis Lind via cctalk wrote:
While going through the HP2640B I found two boards which I cannot find
relevant schematic and description for, the 02640-60009 Display Memory
Access Module and the 02640-60088 Display Timing Module. Anyone has more
info on these?
The manual for the 02640-60088 is here:
http://www.hpmuseum.net/document.php?hwfile=2542
Looking more into this document revelas that it covers three boards
02640-60009, 02640-60088 and 02640-60112.
Now I had the idea of dumping the character ROM as well. But what is a AMD
27S82? I cannot really find a datasheet online. From the schematics above
it looks not too much off from standard 2716 EPROM with pin 19 (A10) as E3
, pin 21 (VPP) as /E1. But my Data I/O 29B does not seem to be compatible
with 27S82 and as pin 21 is active low it gives that a 2716 setting in the
programmer (reader) won't work.
Does the 27S82 have any equivalents that I could look up instead in the
device list?
I couldn't find that part number either, but I dumped the PROMs on my 2647A
Control Memory PCAs, which use an AMD AM9216BDC PROM. It appears to be set up
the same way as you describe. I hand-wired an adapter to plug into my 29B,
and told it that I was reading a 2716. The datasheet for the AM9216BDC is in
the AMD MOS/LSI Data Book:
http://bitsavers.informatik.uni-stuttgart.de/components/amd/_dataBooks/1980_AMD_MOS_LSI_Data_Book.pdf
Mike Loewen mloe...@cpumagic.scol.pa.us
Old Technology http://q7.neurotica.com/Oldtech/
